4Online Movie Streaming

Information-CAP STRIP SLITTER cum Winder

	LET OFF SECTION : Suitable for roll Wound Fabric or Spool Wound Fabric. Mounted on a fabricated rigid steel structure with 45x45 mm Sq. Shafts for mounting "to be processed rolls," Each let off is fitted on a moveable rail which is controlled by a suitable electro-electro centering device.
	ACCUMULATOR : This is used to keep the machine running while roll changes are made at the let off section. An adjustable air pressure controller tension between between the accumulator and slitter.
	SLITTER : This section consist of adjustable width blades as per design requirement. The pressure of the slitting blade is adjustable to suit the type of fabric. Prior to slitting, an electro-electro centering device ensures perfect centering of the fabric. This ensure the slit strip width within a tolerance of +/- 1mm. Depending upon the product requirement, blades can be fitted for a variable width from 8 mm to 15 mm.
	WINDERS : Number of stations-6. Can also be designed for 4, 8 or as per customer requirements The windings tension of the product is independently controlled by a a PLC and variable frequency drives.
	Wound dia of the product roll : 450 mm max Width of the product roll : 230 mm max Total Length of the cap built : 2500 mtrs. (For standard 10 mm width) No. of tyres can be built : 150 nos./ roll .app. (depends upon tyre design)
	CONTROL SYSTEM (optional) : The entire equipment is controlled by a PLC. Each drive is fitted with geared motors and powered by variable frequency ( variable speed) AC drive. A feedback control system ensures the tension of each winder station precisely controlled. An operator friendly Maan-Machine interface ( Display system ) is fitted on the operator panel. Adequate no. of proximity switches ( on/off and proportional analog ) are part of the equipment